Comstock Castle Commercial Griddles

Below you will find information on Comstock Castle commercial griddles. A brochure and specification sheet is provided with each piece of equipment.
 

Heavy Duty Griddles

Comstock Castle 26 Series and 29 Series Commercial Griddles

CONSTRUCTION: Two series to choose. The “26” series measures
28" deep, the “29” series measures 31" deep. Both feature easy cleaning,
corrosion resistant stainless steel finish, welded with aluminized inner
framing. Double wall construction with heavy insulation for cooler
operation. Installation clearances for non-combustible surfaces are 2"
on the sides and 2" in the rear, combustible surfaces are 6" on the sides
and 6" in the rear.

CONTROLS: Equipped with accurate Robertshaw BJ thermostats.
One thermostat for every 12" burner section. Temperature range from
150° to 450°. Safety pilot controls automatically shut the gas off in the
event the pilot light goes out. Brass gas valves are durable and trouble free.
Automatic standing pilots. Pressure regulators are set at the factory for
the gas specified. Optimal pressures are 4" WC for natural gas and 10"
WC for propane. Manifold size is 3/4" NPT. All controls are tested and
confirmed in good working order. Calibration and adjustments are the
responsibility of the installer.

BURNERS: 26 series models feature long life cast iron “H” burners
rated at 20,000 BTU’s. 29 series models feature efficient “U” shaped
burners rated at 30,000 BTU’s each. All burners are spaced on 12"
width increments for maximum productivity.

GRIDDLE PLATE: Standard grilling depth for the “26” series is
21" and 24" for the “29” series. Highly polished 3/4" thick alloy steel
to minimize food sticking. 1" thick is standard for 60" and 72" wide
models. Chrome plating is available. 3" splash guards with front grease
trough. Deep grease drawer, 2 drawers on 60" and 72" models.

ACCESSORIES: Manual gas controls, legs, chrome plating, grooves,
gas hoses, carrying handles, knob protectors, cleaning supplies, spatulas,
and matching equipment stands.

26 Series Griddles
2624CM   2 Burners 24’  40K BTU
T2624C   2Burners 24” 40K BTU
2636CM   3 Burners 36” 60K BTU
T2636C   3 Burners 36” 60K BTU
2648CM   4 Burners 48” 80KBTU
T2648C   4 Burners 48” 80K BTU
2660CM   5 Burners  60” 100K BTU
T2660C     5 Burners 60” 100K BTU
2672CM   6 Burners 72” 120K BTU
T2672C   6 Burners 72” 120K BTU

29 Series Griddles
2924CM   2 24” 60K   BTU
T2924C     2 24” 60K  BTU
2936CM   3 36” 90K  BTU
T2936C     3 36” 90K  BTU
2948CM   4 48” 120K  BTU
T2948C     4 48” 120K  BTU
2960CM   5 60” 150K   BTU
T2960C     5 60” 150K   BTU
2972CM   6 72”  180K  BTU
T2972C     6 72”  180K  BTU

Download HD Griddles PDF brochure

Stainless Griddle FHP Series

Economy Griddles

ECONOMY GRIDDLES

Available in 18, 24”, 36” and 48” widths

All units have stainless steel exterior finish with optional 4” adjustable feet included. Certified for sanitation NSF-4 & gas operation by ETL. All units use standing pilot lights with brass manual control gas valves. Pressure regulators are supplied with each unit, preset at factory for natural gas (4” W.C.) or propane gas (10” W.C.). All controls are tested and confirmed in good working order. Manifold size is 3/4” NPT.  Calibration and installation adjustments are the responsibility of the buyer.

Griddles: 3/4” thick griddle plate with one 30,000 BTU rated U shaped burner per foot for quick recovery and cooking power. Griddle cooking surface is 19.5” deep. A spatula wide grease trough leads to a front draining grease slot feeding through into an easily removable, large 1 gallon capacity, grease drawer. Some models available with grooved griddle plates. Call for models and pricing.

Models: EG18, EG24, EG36, EG48